How To Install Ios On Macbook Pro 2011

EliteMacx86

How to Install macOS Monterey on Unsupported Mac Pro

An EliteMacx86 Exclusive Guide - This guide covers a clean installation of macOS Monterey on Unsupported Mac Pro, unofficially. The guide supports Mac Pro3,1, Mac Pro4,1 and MacPro5,1.

Overview

Recently, Apple announced their new macOS lineup i.due east macOS Monterey 11.0 which is Apple's newest and most awaited OS. Big Sur calculation massive updates and improvements from its predecessor, Catalina.

Packed with new features and functionality, the most noticeable update can be seen and experienced is the new GUI. Featuring a much more "iOS" look and experience and as smooth as butter. With each release of macOS, Apple tree remove supports for old hardware.

Unfortunately, with the the release of macOS Monterey, Apple has officially dropped support for Mac Pro 2008, 2009, and Late 2022. Luckily, for our fans and readers though, we're going to provide you a complete installation guide step-by-step.

If y'all've made and effort to install macOS Monterey before reading this guide, you lot've probably been greeted with the prohibited or no-entry sign immediately subsequently booting from the Monterey installer.

With this in mind, you'll take to use other mode to become macOS Monterey on your unsupported Mac Pro. Previously, barrykn, did an first-class job for running macOS Big Sur on unsupported Macs. As in that location's no any piece of work for macOS Monterey from barrykn yet, but the same patcher can be used to install macOS Monterey.

macOS Monterey Compatibility

Mac Pro (Belatedly 2022) and later Mac Pro models supports macOS Monterey, natively. Refer to the chart below to confirm the compatibility of your Mac Pro.

= Completely unsupported in whatever means.

= Unofficially supported

✔ = Officially supported.

Note:

*Requires a Metal-uniform GPU and an upgraded WiFi/BT Card.

Take another Mac model and want to run macOS Monterey? You can detect the complete list of supported Mac models for macOS Monterey and bank check whether your Mac model is listed. The compatibility list is linked beneath.

macOS Big Sur Compatibility List

macOS Big Sur Compatibility List Following are the list of compatible Mac models which supports macOS Big Sur. To upgrade your Mac to macOS Big Sur, check the guide beneath...

Have another Unsupported Mac other than a Mac Pro and desire to run macOS Monterey? Check out our exclusive installation guide for Unsupported iMac and Mac mini below.

For Unsupported iMac

For Unsupported Mac mini

For Unsupported MacBook Air

Requirements

Earlier you start with this guide, here are the requirements for setting up macOS Monterey on your unsupported Mac Pro.

Mac Pro	Early 2008, Early on 2009 and Mid 2022
Kick ROM Version	144.0.0.0.0*
Graphics Card	Any Metal-Uniform supported Graphics Carte

To ostend whether you accept a supported and Metallic-uniform Graphics, check the GPU compatibility below.

For NVIDIA

NVIDIA GPU Compatibility List for macOS

Reserved 200 Series Manufacturer Model Retentivity Size Retentivity Interface Memory Interface Width Metal Compatible Sierra Loftier Sierra Mojave Catalina Large Sur NVIDA GeForce 210 GeForce GT 220 GeForce GT 240 GeForce 400 Series...

For AMD

AMD GPU Compatibility List for macOS

HD 2000 Serial Manufacturer Model Retentiveness Size Memory Interface Memory Interface Width Metal Compatible Sierra High Sierra Mojave Catalina Big Sur Radeon HD 2350 Radeon Hd 2400 PRO Radeon HD 2400 XT Radeon HD 2600 PRO...

If you come across all the above requirements, y'all're good to become and can start with the guide.

This Guide includes 5 important sections which are as follows

Preparing your Mac Pro
Installing macOS Monterey
Postinstallation
Calculation OpenCore to your Mac Pro

The next steps are continued in the mail #2 of this thread for continuing with the preparing and patching the USB installer.

EliteMacx86

How to Install macOS Monterey on Unsupported Mac Pro
STEP 1: Create a Backup of your Mac

Before you proceed with the installation, we advise yous to perform a fill-in of your Mac. In case the installation fails or you lot see any issue with the installation, you can roll back to your existing installation.

To create Fill-in for your Mac, follow the guide below

Stride 2: Download macOS Monterey

The next step is to download macOS Monterey. Normally, yous won't be able to become new updates as you're using unsupported Mac and Apple will block updates for new Os. However, there'southward another workaround bachelor and you can download the copy of macOS Monterey very easily. To download macOS Monterey, follow the guide beneath

GUIDE - How to Download macOS Monterey on Unsupported Mac

How to Download macOS Monterey on Unsupported Mac An EliteMacx86 Exclusive Guide - This guide covers downloading a copy of macOS Monterey, unofficially. Overview Recently, Apple announced their new macOS lineup i.eastward macOS Monterey 12.0 which is Apple tree's newest and near awaited Os. Big Sur...

Pace iii: Creating macOS Monterey Bootable USB

Subsequently downloading macOS Monterey, the next step is to create the Bootable USB for macOS Monterey. To create macOS Monterey Bootable USB, follow the guide below

GUIDE - How to Create macOS Monterey Bootable USB

How to Create macOS Monterey Bootable USB The following is a guide for creating macOS Monterey Bootable USB. The installation has been covered in another section. You tin can utilise this USB for a clean install of macOS Monterey on your compatible Mac. Before you lot outset with this guide, hither are few...

Annotation:
Every bit you've already downloaded macOS Monterey, so just go along with the createinstallmedia step to create your Bootable USB
STEP 4: Preparing the USB Installer

The next step is to set the USB installer for booting macOS Monterey. Before you start preparing the USB installer, check the macOS version back up below for patching the USB installer.

Micropatcher Version [v0.5.1]

macOS Version	Build Number
macOS Monterey 12.0 Developer Beta	21A5248p

I. Patching USB Installer
The next step is to run micropatcher to patch the USB installer. To patch your USB Installer, follow the steps below.

one. Download Micropatcher
2. Extract the Micropatcher to your Desktop
3. Open Concluding and type the commands below

                                /Users/yourusername/Desktop/big-sur-micropatcher-0.5.1\ two/micropatcher.sh /Volumes/Install\ macOS\ 12\ Beta

                                /Users/yourusername/Desktop/big-sur-micropatcher-0.5.i\ 2/install-setvars.sh /Volumes/Install\ macOS\ 12\ Beta

Notes:

It'south recommended to utilise the latest version of micropatcher to avoid issues.
You must replace "yourusername" with your bodily username otherwise the command will not work.
Letters and spacings are instance-sensitive.

II. Running setvars EFI Utility
Once you're done with the to a higher place steps, you'll need to run servars EFI utility which volition allow to boot macOS Monterey. To setup setvars on your Mac Pro, follow the steps below.

1. Restart your Mac and while restarting, hold down the selection key and kick from "EFI Kicking".

Note:
Once you lot boot from EFI boot, your Mac Pro volition close down. This is an indication that the setvars EFI utility has successfully finished making necessary changes to your Mac Pro's NVRAM settings. These changes include disabling SIP, disabling authenticated root, and enabling TRIM on not-Apple SSDs.

The next steps are continued in the post

#3 of this thread for continuing with the installation.

EliteMacx86

How to Install macOS Monterey on Unsupported Mac Pro
STEP five: Installing macOS Monterey

Once you end setting up setvars EFI utility, you're ready to install macOS Monterey on your Mac Pro.

1. Starting time your Mac Pro and while restarting, hold down the pick key and kick from "Install macOS Monterey". The installer will load in a while.
ii. When at installation screen, select your preferred language and keep
three. Select Disk Utility and continue, click on View and select Bear witness all Devices.
4. Now select your Hard Drive or SSD on which you want to install macOS and utilise the following parameters to erase your drive.

Options	Value
Proper noun	Macintosh HD
Format	APFS
Scheme	GUID Partition Map

five. Close Disk Utility
half dozen. Select Install macOS Monterey and go on with the options.
7. At present select Macintosh HD and click on Continue.

Notation:
This will accept couple of minutes and volition restart at "Less than a minute is remaining". Upon completion, your Mac Pro volition automatically restart and continue the installation further.

Here information technology ends the first phase of the installation.

8. When your Mac restarts, select Boot macOS Install from Macintosh HD and then kick.

It will continue the second phase of the installation. Upon completion, your Mac will automatically restart.

9. When you're at the welcome screen, continue with the basics options such as Keyboard setup, Network, Computer Account and Privacy settings.

Notes:

If yous go a prohibited or no-entry sign when booting the installer, restart your Mac and boot from "EFI Boot". You need to follow the steps from "Running setvars EFI Utility" mentioned above. Make sure you boot using the "external" (yellow color) EFI boot which represents your USB Installer.
During the installation procedure, your Mac might restart several times. You might get blank screen at certain times simply that'due south normal and the installer is still working in background.
The start boot maybe slower as the caches are not build all the same. Once the caches are built, information technology will boot usually.

The next steps are continued in the post #iv of this thread for continuing with post-installation.

EliteMacx86

How to Install macOS Monterey on Unsupported Mac Pro
Pace 6: Mail Installation

After installation, Post Installation needs to be performed. The mail service installation is required to achieve the fully system functionality.
Typically, the post installation includes enabling boot from the organization drive, Graphics, Network, Audio, USB Ports Mapping, and Power Management. Merely for a real Mac, you only need to patch kexts and setup booting from Organisation Drive using OpenCore.

I. Patching Kexts
After completing the installation, you need to patch the kexts for making WiFi, BT and USB ports functional.

To patch the kexts, follow the steps below.

i. Open your USB Installer which is named as "Install macOS Monterey."
two. From Spotlight search, find and open Final
3. In Final, type the post-obit command below

                                /Volumes/Install\ macOS\ Big\ Sur/patch-kexts.sh

You should see something similar like the screenshot attached below.
iv. When prompted, enter your countersign.
5. The script will start to patch the kexts. In one case it finishes the process, you should see something like similar the screenshot attached beneath.
half dozen. Quit Terminal
7. Restart your Mac Pro.
viii. Press and concord down Option key during restart and boot from Macintosh HD.
9. When y'all're at the welcome screen, continue with the basics options such as Keyboard setup, Network, Computer Account and Privacy settings.

Notation:
Letters and spacing are instance-sensitive.

The next steps are continued in the

mail #5 of this thread for continuing with OpenCore installation.

EliteMacx86

How to Install macOS Monterey on Unsupported Mac Pro

Now, the installation is complete but you might accept been wondering why OpenCore is needed on a real Mac? The answer is simple, your Mac Pro will lack encoding and macOS update role. To enable encoding and macOS updates, yous'll need to use OpenCore. OpenCore will provide you encoding and seamless updates only like a supported Mac Pro under Software Update in System Preferences.

Step 7: Preparing OpenCore Bootloader

To prepare OpenCore boot loader, you need to download OpenCore.
Download the Release folder followed past the release version.
When extracting, y'all'll get iv folders which has been listed below.

Directories	Purpose
Docs	Contains documentation, change log, a sample config.plist, and ACPI Samples for OpenCore
IA32	Contains OpenCore EFI, 32-fleck OpenCore Kick Loader
Utilities	Contains several utilities
x64	Contains OpenCore EFI, 64-bit OpenCore Boot Loader

1. Copy X64 to your working directory and follow the steps below

I. Calculation Required Drivers
Drivers are mandatory which allows several of import function and is required to kick the system. Follow the steps below to add the drivers.

Commuter Name	Required	Notes
OpenCanopy.efi	YES	Provides GUI functionality for OpenCore Boot screen. This driver is required for GUI or theme for OpenCore.
OpenRuntime.efi	YES	Runtime driver including several other drivers merged such as ApfsDriverLoader. OpenRuntime.efi is a replacement for AptioMemoryFix.efi commuter.

Note :
All the drivers can be institute at: X64/EFI/OC/Drivers

Ii. Calculation Required Kexts
In order to boot into the installation, you lot need to add together the necessary kexts. Follow the steps below to place the necessary kexts.

Kext Name	Required	Notes
Lilu.kext	YES	Provides arbitrary patching.
WhateverGreen.kext	YES	Provides GPU patching on macOS. *This kext requires Lilu.kext to function*
AppleMCEReporterDisabler	YES	If you're having a Dual CPU, you lot'll need to use this kext.

1. Download the above kexts.
two. Extract the kexts from the RELEASE folder.
three. Copy the kexts to: /EFI/OC/Kexts

Notes

:

Exercise not download the projection files. The pre-congenital binaries/downloads are bachelor in the README.physician section. Brand certain you lot read information technology carefully.
Download the latest version for better support.
Use the kext from RELEASE folder and RELEASE.nix file.
Exercise not place unnecessary kexts here. It might prevent booting the installer.

III. Selecting a Config.plist File
OpenCore comes with a default config.plist file. This config.plist cannot be used to boot your Mac. You'll need to configure the config.plist according to your hardware, mainly graphics and other devices.

We've already created a split thread on configuring your config.plist to boot the installer. Depending on your Mac model, create a config.plist co-ordinate to the guide. For more data on creating a config.plist, follow the guide below.

4. Installing OpenCore Bootloader
one. Mount the EFI partition of your system drive.
2. Copy the EFI from your working directory to your system drive.

V. Booting from Organization Drive
This is i of the about important function as it will permit yous to boot from OC from your EFI partition.

1. Download Bless OpenCore
2. Excerpt it.
3. Right click on Bless OpenCore and click on Open.
4. It volition ask you for a password. Enter your password and click on OK and it will brand the necessary changes.
5. Restart your Mac Pro

By using this method, you'll be easily able to kick OpenCore Kicking loader on your System Bulldoze.

Annotation:

Always use right click and then run Bless OpenCore or information technology may fail to brand the necessary changes.
For sometimes, the OpenCore may not starting time at the first kicking. To verify, use Hackintool to check the Lath ID. A workaround this issue is to repeat the process of Anoint OpenCore.

At present you've successfully installed macOS Monterey, and configured it. The installation is complete!

Enjoy macOS Monterey on your unsupported Mac Pro

FAQ [Frequently Asked Questions]

Q. How can i reset PRAM?
A. Apply Command+Option+P+R to reset PRAM.
Q. How can i boot into recovery?
A. Use Command+R to boot into recovery.
Q. Is hardware encoding supported?
A. Yes, hardware encoding is fully supported. Both, H.264 and H.265 encoding are supported.

How To Install Ios On Macbook Pro 2011

macOS Big Sur Compatibility List

NVIDIA GPU Compatibility List for macOS

AMD GPU Compatibility List for macOS

GUIDE - How to Download macOS Monterey on Unsupported Mac

GUIDE - How to Create macOS Monterey Bootable USB

Similar threads

0 Response to "How To Install Ios On Macbook Pro 2011"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel